Static mixer works, is to let the fluid flow in the pipeline impact of various types of board components, increasing the speed of movement of the fluid laminar or turbulent gradient, laminar flow is "split - position - re-convergence," when turbulence Except for the above three cases the fluid, the cross-sectional direction will generate intense vortices strong shearing force is applied to the fluid, the fluid mixture further divided, final mixing to form the desired emulsion. It is called "static" mixers, no moving parts inside the conduit means, only a stationary member. 

      The mixing process is a series of static mixer mixing means installed in the hollow of different specifications for the pipeline. The action of the mixing unit, so that the fluid to L, sometimes turn right rotation, changing the direction of the flow mixer, a fluid into the surrounding not only the central and the peripheral edge toward the center of the fluid, resulting in a good radial mixing. At the same time, the rotation of the fluid itself in the adjacent junction interface components will occur, this perfect radial mixing circulation, so that the material obtained mixing purposes. Static mixer is a no efficient mixing equipment movement through the mixing unit is secured in the tube, so that two or more strands of fluid produced cut, crop, rotate and re-mixed to achieve good dispersion between the fluid and full dehumidifiers mixing purposes.

      SV-type units are assembled from a certain specification cylinders made of corrugated board, the highest degree of dispersion of 1-2mm, liquid-liquid and gas vapor viscosity of 102 cps applicable to liquid - liquid, liquid - gas, gas - gas mixed emulsion, reaction, absorption, extraction, enhanced heat transfer process. Unit from the hole channel left and right reversed spiral welded piece group, the highest degree of dispersion of 10um, liquid - liquid, liquid-solid phase inhomogeneity translation factor. Used in chemical, petroleum, pharmaceutical, food, fine processing, plastics, environmental protection, synthetic fibers, mineral sector governance mixed reaction, extraction, absorption, injection molding, such as color transfer process. Smaller flow and mixed with impurities or viscosity of 106 cps high viscosity media become available.

      Unit by the cross bar according to certain rules constitute many X-type unit, the technical characteristics: Mixed uneven degree of s. Applicable to the viscosity of 104 cps in high-viscosity liquid - liquid reaction mixture, mixing or production of polymer absorption process fluids liver cancer, the reaction process, a large amount of processing time with better results. Road unit is composed of two holes, place Spiral chip channel, channel orientation holes adjacent cells with a fluid redistribution room dislocation between 90 units. High degree of dispersion of 1-2mm, liquid - liquid unevenness is 1 to 5%. Mixed demanding high viscosity 06 cps cleaning media is particularly suitable.

       Unit by the cross bar according to certain rules constitute a single X-shaped unit, the technical characteristics of the liquid - liquid, liquid - solid phase mixed, uneven coefficient of 5%. Used in chemical, petroleum, oil and other industries viscosity of 106 cps or with the amount of training mixed polymer Korean media, while heat transfer, mixing and heat transfer reactions, viscous products, such as heating or cooling unit operation. Joint structure of high shear dispersing emulsifier, and a special high-speed disperser mixer consisting of anchored, so it's fluid model has changed a lot. When the high-shear dispersing emulsifier continuous suction from the bottom of the tank up to the level of the injection, they were met with an anchor stirrer rotating flow vertically along the circumferential direction at different cut-storey section that makes up the horizontal flow velocity mode Trademark greatly weakened and distorted. Allows high-speed stream of particles dispersed further dispersed, crushed. Thus, the multifunctional mixer enhanced emulsification, dispersing, homogenizing, mixing and crushing action, its performance is superior. The machine is a set of scattered, mixed multifunctional efficient equipment for lithium-ion polymer battery fluid and liquid lithium-ion battery fluid, electronic electrode paste, adhesives, plastic mold, silicone sealant study in France Soft seal mixed solid and liquid material mechanical seal and unique among kettle body, so that the material can be operated under vacuum. Kettle body can be electrically heated, steam heating and water heating cycle. Unique body temperature autoclave temperature detection device to ensure error-free, jacket cooling coil can be achieved. Kettle body wall of large vertical lathe finishing, ensure that the activities of the kettle when rotating blade body wall and scraped the bottoms of the material completely. The other two groups in the kettle speed disperser, so that a variety of materials subjected to shear mixing and dispersion strongly.